abrasive wear in a sentence
1) This "pullout" looks like excessive abrasive wear on cutting edges.
2) Abrasive wear is one of the forms of wear failures.
3) Abrasive wear and adhesive wear are the common modes of wear failure of gears.
abrasive wear example sentences
4) Abrasive wear can reduce the size and destroy the shape of a shaft.5) Applications of DLC typically utilize the ability of the material to reduce abrasive wear .
6) Cross-linked polyethylene is preferred in hip replacement because of its resistance to abrasive wear .
7) The two modes of abrasive wear are known as two-body and three-body abrasive wear.
8) The two modes of abrasive wear are known as two-body and three-body abrasive wear .
9) Boron carbide is a popular material for nozzles because it resists abrasive wear well.
10) Because the material ductility had not been exceeded, abrasive wear was the only wear mechanism present.
11) There are a number of factors which influence abrasive wear and hence the manner of material removal.
12) Polycrystalline diamond (PCD) is an exceptionally hard coating used on cutters which must withstand high abrasive wear .
13) Figure 3 The side and cross section of a test punch constructed of AISI S7 shows excessive abrasive wear .
14) Abrasive wear can be measured as loss of mass by the Taber Abrasion Test according to ISO 9352 or ASTM D 4060.
15) The limits of AISI S7 during this test were at about 100,000 blanked parts; then failure occurred because of excessive abrasive wear (which is common with AISI S7).
use abrasive wear in a sentence
16) We found consistent evidence of impingement, abnormal stripe damage, and evidence of third-body abrasive wear in a small sample of one type of 28-mm MoM design.17) The "as plated" low phosphorus deposits tend to withstand abrasive wear better than the high phosphorus coatings, largely attributed to the higher hardness values.
18) Some examples of abrasive wear of shafts are foreign particles such as sand, dirt, metallic particles, and other debris in the lubricant.
19) Abrasive wear , or abrasion, is caused by the displacement of material from a solid surface due to hard particles or protuberances sliding along the surface.
20) Contact materials are also chosen on the basis of electrical conductivity, hardness (resistance to abrasive wear ), mechanical strength, low cost and low toxicity.
21) Three commonly identified mechanisms of abrasive wear are:
22) AISI S7 and the third-generation P/M tool steel performed similarly until abrasive wear became a factor.
23) Figure 5 At 140,000 blanks, the punch constructed of a propriety, third-generation P/M tool steel shows only abrasive wear with no chipping or cracking.
24) At 140,000 blanked parts, the punch constructed of the P/M tool steel did not show any chipping or cracking; the only wear mechanism was uniform abrasive wear .
25) Abrasive wear is commonly classified according to the type of contact and the contact environment. [ 10 ] The type of contact determines the mode of abrasive wear.
26) Abrasive wear is commonly classified according to the type of contact and the contact environment. [ 10 ] The type of contact determines the mode of abrasive wear .
This site is designed to teach you English words in context with collocations with the help of example sentences.
You can easily memorize the word and the meaning of abrasive wear
and This is a fast way of learning the meaning of abrasive wear with example sentences.
Always focus on the learning on sentences with abrasive wear
We believe you will easily learn to write and use the word abrasive wear in a sentence.
You can practice spelling and usage of the word by getting 10 examples of sentences with abrasive wear.
20 examples of simple sentences of abrasive wear. We tried to find and publish the the words with Simple Sentences of abrasive wear
Compound Sentences with abrasive wear
Complex Sentences with abrasive wear
Compound-Complex Sentences with abrasive wear